Archco Rigidon Product Guide

Applied Thickness
Designation Substrate Temperature Limits
Immersion Fumes/Spillage
Flake Filled Coatings
200 Series

Linings & Coatings, reinforced with inert flakes, which are specifically recommended for use in sea water applications & water treatment industries for both internal & external protection.

Spray or brush 1 mm Coating or lining Steel 60°C (140°F) 90°C (2000°F)
Glass Flake Linings
400 Series

Medium duty linings which are reinforced with glass flakes. These systems are suitable in immersion conditions for dutieswhich include severe chemical environments.

Spray or brush 1 mm Lining Steel 60°C (140°F) 90°C (2000°F)
500 Series

Heavy duty linings which are reinforced with glass flakes.These linings offer the ultimate in chemical resistance withinthe glass flake range of materials & can operate at temperatures up to 100°C under immersion conditions.These linings may also be used where abrasion & erosion resistance is more crucial.

Spray or trowel 2 mm Lining Steel 100°C (212°F) 170°C (338°F)
Filled Reinforced Linings
600 Series

Linings which are formulated from resin & glass fibrereinforcement together with a filled base coat. These linings are specifically recommended when alining with a resin rich top coat is required for maximum chemical resistance.

Trowel & hand lay-up 3mm - 4mm Lining Steel or Concrete 75°C (170°F)
60°C (140°F
75°C (170°F)
60°C (140°F)
700 Series

A silica filled, glass cloth reinforced series of linings designed for heavy duty concrete & flooring protection, but can also be used on steel.

Trowel 3mm - 4mm Lining Concrete Flooring 75°C (170°F) 150°C (300°F)
Specialty Coatings

A specially developed lining for the offshore industry
which is resistant to sea water & oil at operating temperatures up to 150°C maximum. The lining has a hard high gloss finish.

Spray 400 microns Lining Steel 150°C (300°F) 150°C (300°F)

A lining which has been specifically developed for use in swimming pool & industrial filters. Resistant to chlorine, ozone & back flushing.

Spray or brush 1 mm Lining Steel 70°C (160°F) 70°C (160°F)

A lining developed for use in road & rail tankers carrying aggressive chemical products or acid waste. A specially developed top coat gives resistance to Hydrofluoric acid.

Spray or trowel 2 mm Lining Steel 100°C (212°F) 100°C (212°F)